These internal halyard flagpoles contain a winch mounted inside the flagpole shaft, 
operable only with a removable crank handle. As the stainless steel cable unwinds 
from the winch, it passes up through the inside of the flagpole shaft, over the truck 
sheave to the outside of the shaft, where the retainer ring provides a sliding anchor. 
A counterweight, heavily coated with neoprene, attached to the retainer ring, allows 
the halyard to be lowered for fastening or removing the flag. The winch is gearless 
and self-locking at any point, eliminating the need for a separate brake. This direct 
drive winch provides rapid raising and lowering of the flag with little effort. This design 
does not require any welding, thus avoiding discoloration when an anodized finish is 
desired. No monthly lubrication is needed.

 STANDARD ACCESSORIES
 •  Cast aluminum revolving truck with 
enclosed stainless steel bearings and 
raceway
 •  Stainless Steel Cable Assembly
 •  Deluxe Flag Arrangement
 •  Retainer ring and counterweight
 •  M-Winch System
 •  Spun aluminum flash collar
 •  Galvanized steel foundation sleeve

Ornament sold seperately
 

3 Sections

12" Butt

 4" Top Diameter

Wall .375

Unflagged Winspeed 174 MPH

Flagged Winspeed 105 MPH

Suggested Flag Size  20' x 30'

Silver Annodized