Internal Halyard Ground Set Cone Tapered Aluminum Flagpoles shaft, operable only with a removable crank handle. As the 
stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of 
the shaft, where the retainer ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retainer ring, 
allows the halyard to be lowered for fastening or removing the flag. The winch is gearless and self-locking at any point, eliminating the need 
for a separate brake. This direct drive winch provides rapid raising and lowering of the flag with little effort. This design does not require any 
welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed.

2 Sections

6" Butt

Wall .250